Ikea Fjellse Hacked!

So, I finally hacked the bed. Well, almost. I’m considering adding nail head trim around the front, then possibly framing it, and then it’ll be finished. It isn’t perfect, but I’m happy with the way it turned out. One more project crossed off my ever growing to-do list.

It wasn’t a long process, but I spread it out over 2 days. I think it took a total of 4 hours, and that includes all of the cutting, painting and fiddling with my staple gun. There are a few tutorials online, so I’ll just share my process, and show what I would have done differently.

What I used:

• screwdriver
• spray glue
• wood glue
• foam
• batting
• mending plates
• furring strips 
• paint
• primer
• clamps (since I was working upright)

• OSB (I cut my piece with a jigsaw…it was far from perfect, and really didn’t make a difference)

The top measured up almost perfectly, in the picture below, the OSB isn’t attached, just leaning against the back.I knew that the foam and batting would be forgiving so I didn’t worry about making the straightest lines in the world.

If I were to do it again, this is the part I would do differently.

I should have corrected this immediately, but I decided to push on, and see how it developed. It doesn’t look terrible, but the sides aren’t an even thickness from the top to the bottom.

I do love the paint color though, and it looks even better after the second coat.

This room is starting to come together, and I have to say that I’m very pleased with the progress.

Until the next time,

signing off.